Download Aircraft Flight Principles - AED304 Past Question PDF

You will find Aircraft Flight Principles past question PDF which can be downloaded for FREE on this page. Aircraft Flight Principles is useful when preparing for AED304 course exams.

Aircraft Flight Principles past question for the year 2021 examines 300-level Engineering students of AFIT, offering AED304 course on their knowledge of Aircraft Flight Principles, Dynamic pressure, pitot tube, wind tunnel, flow velocity, pressure coefficient, stall, velocity profile, airfoil

Technical Details
Updated at:
Size: 162.01 KB
Number of points needed for download: 36
Number of downloads: 3

Past Questions related to Aircraft Flight Principles

Introduction to aerospace systems I

Year: 2022

School: Air Force Institute of Technology

Department: Engineering

Course Code: AED201

Topics: Aerospace systems, Aircraft maintenance, Aircraft calibration, Aerospace engineering, Aircraft airworthiness certificate, aerodynamics, propulsion, avionics, aircraft maintenance engineer, safety culture

Aircraft Systems

Year: 2021

School: Air Force Institute of Technology

Department: Engineering

Course Code: AED306

Topics: aircraft systems, fly by wire system, mechanical flight control system, mach trim operation, auto pilot system operation, standing-wave ratio, Yagi-Uda half dipole antenna, radar, aviation fuel system, aviation fuel contaminants

Principles of cultural materials handling

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: FPE407

Topics: Materials handlings, machinery cost, screw conveyor, single ribbon flight, variables pitch flight, tapered flight, non free flowing materials, agricultural processing, depreciation, terminal velocity

Open channel hydraulics

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: SWE405

Topics: Open channel hydraulics, open channel flow, pipe flow, lined canal water carrying capacity, mean flow velocity, lined canal trapezoidal, permissible velocity range, Manning's coefficient, critical depth, critical velocity, trapezoidal grassed channel design

Introduction to Aerospace Systems

Year: 2021

School: Air Force Institute of Technology

Department: Engineering

Course Code: AED201

Topics: Aerospace Systems, Aircraft maintenance, Safety culture, Nigeria Civil Aviation Authority, Aerospace engineering, Aircraft license, Aerospace engineer

Fundamentals of renewable bioresources

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: BRE341

Topics: renewable bioresources, solar plants, solar water heating, concentrated solar plants, renewable energy, geothermal energy, wind energy, non renewable energy, wind cycle

Geotechnical engineering

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: CIE522

Topics: Geotechnical engineering, slope stability, seepage forces, soil's shear, pore-water pressure, Fellenius's solution, Bishop's solution, depth of tension crack, retaining wall, foundation criteria, foundation bearing capacity, Rankine active earth pressure coefficient, Rankine passive earth pressure coefficient, embankment dam filter, Meyerhof's theory for failure mechanism, foundation failure

Multiple phase flow in pipes

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET517

Topics: Pipe Multiple phase flow, multiphase heat transfer, stratified flow, Taylor bubbles, slug-free flow, Taitel-Dukler flow regime models, boiling, condensation, evaporation, fluid transportation, Boiling regimes, natural convection boiling, nucleate boiling, transition boiling, film boiling, total pressure drop equation

Introduction to Aerospace System 2

Year: 2022

School: Air Force Institute of Technology

Department: Engineering

Course Code: AED202

Topics: Aerospace System, Drag, lift, flight dynamics, Fly-by-wire systems

Petroleum rock mechanics

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET415

Topics: Petroleum rock mechanics, isotropic rock, anisotropic rock, rock dynamic properties, shear modulus, young's modulus, elastic region, yield point, chip hold down, uniaxial compressive strength, ductile region, brittle region, shear failure, hydro pressure, abnormal formation pore pressure, overburden pressure

Soil plants and energy balance Principles

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ABE504

Topics: Soil plants, energy balance Principles, hydrostatic potential, capillary potential, hygroscopic potential, surface tension, soil moisture stress, wetting front, saturation capacity, field capacity, moisture equivalent, wilting coefficient, wilting range, available water, matrix potential, gravitational potential, solute potential, pressure potential, saturated condition, dry condition, transpiration, evapotranspiration

Petroleum production engineering 2

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET405

Topics: Petroleum production engineering, surface production operations, horizontal separator, vertical separator, operating temperature, separator coefficient, operating pressure, commercial absorbents, gas flow rate, gas specific gravity, operating line pressure, gas inlet temperature, emulsion formation

Reservoir engineering 2

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET403

Topics: Reservoir engineering, bubble point curve, critical point, dew point curve, cricondentherm, cricondenbar, reservoir fluid sampling, oil flow rate, pressure profile

Fluid mechanics 2013,2014&2015

Year: 2015

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG309

Topics: pressure, free surface, Reynolds number, bulk modulus, turbulent flow, steady flow, cavitation, shear, orfice, kinetic energy, potential flow, incompressibility of fluid

Books related to Aircraft Flight Principles

Fluid mechanics and hydraulics

Author: Mahesh kumar

School: Chukwuemeka Odumegwu Ojukwu University

Department: Engineering

Course Code: ENG232

Topics: fluid pressure, hydrostatic forces, submerged surfaces, buoyancy, floatation, fluid kinematics, fluid dynamics, vortex flow, potential flow, ideal fluid flow, laminar flow, viscous flow, boundary layer theory, compressible flow, model similitude, free jets, fluid machines, pelton turbine, impulse turbine, francis turbine, radial flow reaction turbines, propeller, kaplan turbine, axial flow reaction turbines, hydraulic turbines, centrifugal pumps, reciprocation pumps, hydraulic systems, fluid continuum, fluid properties, specific weight, weight density, viscosity, perfect gas law, isobaric process, adiabatic process, surface tension, capillarity, capillary effect, vapour pressure, cavitation, pascal's law, hydrostatic law, Bouyant force, centre of buoyancy, archimedes principle, metacentre, metacentric height, cauchy-reimann equations, Euler's equation, Bernoulli's equation, continuity equation, orfices, hydraulic coefficients, uniform flow, source flow, sink flow, free vortex flow, notches, weirs, francis formula, bazin formula, rehbock formula, cipolletti weir, reynolds experiment, Navier-stoke equation, efflux viscometer, ogee weir, boundary layers, stagnation pressure, stagnation density, stagnation temperature, specific energy curve, critical depth, critical velocity, sub-critical flow, hydraulic jump, francis turbine, velocity triangle, draft tube, rotodynamic turbine

Flight stability

Author: Abashe Tokan

School: Air Force Institute of Technology

Department: Engineering

Course Code: AED201

Topics: Flight stability, Aircraft stability, static stability, dynamic stability

A Textbook of Fluid Mechanics and hydraulic machines, 9th edition

Author: RK bansal

School: Covenant University

Department: Engineering

Course Code: CVE332

Topics: Fluid Mechanics, hydraulic machines, viscosity, compressibility, bulk modulus, surface tension, capillarity, vapor pressure, cavitation, Pascal's law, manometers, Piezometer, differential manometer, isothermal process, buoyancy, flotation, meta-center, fluid flow, continuity equation, velocity, acceleration, velocity potential function, stream function, equipotential line, Vortex flow, ideal flow, potential flow, momentum equation, free liquid jets, orifices, mouthpieces, notches, weirs, viscous flow, turbulent flow, Reynolds experiment, dimensional homogeneity, model analysis, dimensionless numbers, Boundary layer flow, compressible flow, Mach number, Jet propulsion, hydraulic machines, turbines, Pelton wheel, Radial flow reaction turbines, Francis turbine, axial flow reaction turbine, Draft tube, specific speed, unit quantities, centrifugal pumps, cavitation, maximum suction lift, net positive suction head, reciprocating pumps, air vessels, fluid system, hydraulic press, hydraulic accumulator, hydraulic intensifier, hydraulic ram, hydraulic lift, hydraulic crane, hydraulic coupling, hydraulic torque converter, air lift pump, gear-wheel pump

Soil and Water Conservation for Productivity and Environmental Protection, 4th edition

Author: Frederick Troeh, Arthur Hobbs, Roy Donahue

School: National Open University of Nigeria

Department: Agriculture and Veterinary Medicine

Course Code: SLM308

Topics: Soil Conservation, Water Conservation, erosion, Soil Erosion and Civilization, Geologic Erosion, Sedimentation, Landscape Development, rock types, Sedimentary Landforms, Mass Movement Deposits, Glacial Landscapes, Water Erosion, erosion damage, Vegetation, Soil Properties, Soil Erodibility, pollution, Water-Erosion Control, Wind Erosion, wind erosion process, Windbreaks, Shelterbelts, Wind-Erosion Control, Predicting Soil Loss, Tolerable Soil Loss, Universal Soil Loss Equation, Computer-Based Soil Loss Prediction Models, Wind-Erosion Prediction Equation, Wind Erosion Prediction System, Soil Map Unit Interpretations, soil survey, Land Use Planning, managing land, cropping systems, Managing Monocultures, crop rotations, Multiple Cropping, Evaluating Cropping Systems, strip cropping, tillage, Conservation Tillage, deep tillage, Contour Cultivation, Emergency Wind-Erosion Control, Gully-Control Structures, road ditches, culverts, Earthen Dams, Streambank Protection, flood control, Wind Erosion-Control Structures, Pastureland Management, Rangeland Management, Forestland Management, water cycle, drought, Soil Drainage, wetlands, Irrigation, Irrigation Methods, Land Reclamation, Conservation Irrigation, soil pollution, pollutants, industrial wastes, agricultural wastes, aerosols, polluted soil, Hazardous Sites, Soil Remediation, Water Quality, water Pollution, Water acidification, Farm Service Agency

Applied mechanics, 3rd edition

Author: Hannah, MJ Hillier

School: Federal University, Oye-Ekiti

Department: Engineering

Course Code: MEE203

Topics: Applied mechanics, statics, mass, force, weight, couple, frameworks, friction, square-threaded screw, tribology, average speed, constant speed, velocity, free falling bodies, inertia, Variable forces, Periodic Motion, Simple harmonic motion, Car wheel balancing, Periodic time, simple pendulum, resonance, Angular acceleration, Centripetal acceleration, Centripetal force, Centrifugal force, Dynamic instability, balancing, static balance, dynamic balance, springs, energy, kinetic energy, potential energy, impulse, momentum, Impulsive forces, Inelastic collisions, aircraft, rockets, Reaction propulsion, Jet propulsion aircraft, Helicopters, Rocket propulsion, thrust, Ductile metals, metal, alloy, Shear Force, Bending Moment, Bending moment diagram, Poisson's ratio, stress, strain, Strain energy, Combined loading, Combined Bending, Direct Stress, fluid, pressure, Experimental Errors, discrepancy, error

Introduction to Materials for Advanced Energy Systems

Author: Colin Tong

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MCE403

Topics: Advanced Energy Systems, Energy resource, energy system development, energy process characterization, energy calculations, energy accounting, sustainable energy development, Dynamic Mechanical Spectroscopy, nano-scale material, micro-scale material, nanoindentation, optical microscopy, electron microscopy, atom probe tomography, advanced x-ray characterization, neutron scattering, phase transformation temperatures, density, specific gravity, thermal conductivity, thermal expansion, electrical conductivity, electrical resistivity, permittivity, permeability, corrosion, oxidation, toughness, materials design, materials modeling, advanced coatings, photovoltaic materials, hybrid solar cells, thermal storage materials, phase change materials, Geothermal electricity, geothermal heat pump, wind resources, wind machinery, energy-generating systems, wind turbine, hydropower technology, ocean energy, hydrogen generation technology, fuel cells, advanced nuclear energy, fission reactors, fusion reactors, thermoelectric materials, piezoelectric materials, pyroelectric materials, magnetostrictive materials, multiferroic magnetoelectric materials, triboelectric materials, artificial photosynthesis

Introduction to Aircraft (Aerospace) Materials

Author: AED AFIT

School: Air Force Institute of Technology

Department: Engineering

Course Code: AED301

Topics: Aircraft Materials, Aerospace Materials, aluminum, Titanium, Magnesium, steel, super alloys, Fibre–polymer composites, Fibre–metal laminates, Factor of safety, Design factor, safety factor, Network Polymers, Deformation mechanisms, Semi crystalline polymers, plastic polymers, elastomers deformation mechanism, Thermoplastics, Thermosets, Time-Dependent Deformation, Stress relaxation test, Advanced Polymers, Ultrahigh Molecular Weight Polyethylene

Velocity profile in a pipe

Author: ABE FUNAAB

School: Federal University of Agriculture, Abeokuta

Department: Engineering

Course Code: ABE106

Topics: pipe velocity profile, Hagen-Poiseuille equation, hydrostatics, Buoyancy, fluid momentum, conservation of mass, Continuity Equation, fluid flow

Principles of Chemical Engineering Processes Material and Energy Balances

Author: Nayef Ghasem, Redhouane Henda

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: CHE202

Topics: Chemical Engineering Processes, Material Balance, Energy Balance, temperature measurement, temperature conversion, dimensional homogeneity, dimensionless quantities, process flow sheet, process unit, process streams, mass flow rates, volumetric rates, moles, molecular weight, stream composition, mass fraction, mole fraction, concentration, pressure measurement, pressure-sensing devices, process units, degrees of freedom analysis, process flow diagram, multiunit process flow diagram, mass balance, Stoichiometric Equation, Stoichiometric Coefficients, Stoichiometric Ratio, Limiting Reactant, Excess Reactants, Combustion Reactions, Chemical Equilibrium, Multiple-Unit Process Flowcharts, Single-Phase Systems, Multiphase Systems, Ideal Gas Equation of State, liquid density, solid density, gas density, Real Gas Relationships, Compressibility Factor, Virial Equation of State, van der Waals Equation of State, Soave–Redlich–Kwong Equation of State, Kay’s Mixing Rules, phase diagram, Vapor–Liquid Equilibrium Curve, Vapor Pressure Estimation, Clapeyron Equation, Clausius–Clapeyron Equation, Cox Chart, Antoine Equation, Partial Pressure, Dalton’s Law of Partial Pressures, Gibbs’ Phase Rule, Bubble Point, Dew Point, Critical Point, Kinetic Energy, Potential Energy, energy balance, steam turbine, heaters, coolers, compressors, Mechanical Energy Balance, Enthalpy Calculations, Constant Heat Capacity, Psychrometric Chart, Heat of Reaction, Heats of Formation, Heat of Combustion, Heat of Reaction Method, Unsteady-State Material Balance, Unsteady-State Energy Balance

Fluid Mechanics and hydraulic

Author: RK Rajput

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG309

Topics: Properties of fluid, pressure measurement, Hydrostatic forces on surfaces, Buoyancy, flotation, Fluid Kinematics, Fluid Dynamics, Dimension analysis, model analysis, Flow through orfices, flow through Mouthpieces, Flow Over notches, Flow Over weirs, laminar flow, turbulent flow

Power Systems Analysis ,3rd edition

Author: Hadi Saadat

School: University of Ibadan

Department: Engineering

Course Code: EEE511

Topics: Power Systems Analysis, power system, electric power generation, fossil power plants, hydroelectric power plants, solar power, wind power plants, geothermal power, biomass power plants, fuel cell, modern power system, smart grid, energy control center, complex power, complex power balance, power factor corrrection, per phase analysis, balanced three-phase power, generator models, transformer models, per unit system, transformer performance, autotransformers, three-winding transformers, transmission line parameters, line model, line compensation, power flow analysis, bus admittance matric, Gauss-Seidel power flow solution, Newton-Raphson method, power flow programs, synchronous machine, transient analysis, unbalanced fault, stability, swing equation, transoent stability, steady-state stability, power system control, automatic generation control, load frequency control, MATLAB, frequency response, reactive power, voltage control, excitation system

An Introduction to Soil Mechanics

Author: Arnold Verruijt

School: University of Ilorin

Department: Engineering

Course Code: CVE422, CVE322, ABE384

Topics: grain size, particles, water, air, stress in soil, stress in a layer, Darcy's law, permeability, groundwater flow, flotation, flow net, well, stress strain relations, tangent modulus, one-dimensional compression, analytical solution, numerical solution, consolidation coefficient, creep, sheer strength, triaxial test, shear test, pore pressure, stress path, elastic stresses, deformation, boussinesq, newmark, flamant, layered soil, lateral soil, rankine, coulomb, earth pressure, sheet pile wall, limit analysis, strip footing, prandtl, bearing capacity, infinite slope, slope stability, soil exploration, model test, pile foundations

Unit Operations of Chemical Engineering, 5th edition

Author: Warren McCabe, Julian Smith, Peter Harriott

School: Institute of Management Technology

Department: Engineering

Course Code: CHE303

Topics: Fluid Mechanics, Fluid-Flow Phenomena, Equations of Fluid Flow, Flow of Incompressible Fluids, Flow of Compressible Fluids, Flow past immersed bodies, Transportation of fluids, Metering of fluids, Agitation of liquids, mixing of liquids, Heat transfer, heat flow in fluids, Heat transfer to fluids without phase change, Heat transfer to fluids with phase change, Radiation heat transfer, Heat exchange equipment, Evaporation, Equilibrium stage operations, Distillation, multicomponent distillation, Leaching, Extraction, Diffusion, Mass Transfer between Phases, Gas Absorption, Humidification Operations, Drying of Solids, Adsorption, Membrane Separation Processes, Crystallization, Properties of Particulate Solids, Handling of Particulate Solids, Mixing of Particulate Solids, Mechanical Separations

Fluid mechanics

Author: IO Arukalam

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG309

Topics: fluid resistance, Reynolds number, newtonian and non-newtonian fluid flow, laminar flow analysis, turbulent flow analysis, Newtonian fluids, non-newtonian fluids, fluid resistance, fluid resistance equation, laminar flow, turbulent flow, Reynolds number, unsteady fluid flow

Applied Well Test Interpretation

Author: John Spivey, John Lee

School: Abubakar Tafawa Balewa University, Bauchi

Department: Engineering

Course Code: PEE513

Topics: Well Test Interpretation, well test, wellbore storage, Radial Flow Semilog Analysis, Log-Log Type Curve Analysis, Pressure Transient Testing, gas flow equation, flow regimes, diagnostic plot, bounded reservoir behavior, Variable Flow Rate, flow rate, wellbore phenomena, Near-Wellbore Phenomena, Well Test Interpretation Workflow, Well Test Design Workflow

Fundamentals of Vehicle Dynamic

Author: Thomas Gillespie

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ATE503

Topics: Vehicle Dynamic, Dynamic Axle Loads, acceleration performance, power-limited acceleration, power train, automatic transmissions, braking forces, brakes, tire-road factor, Brake Proportioning, Anti-Lock Brake Systems, braking efficiency, rear wheel lockup, pedal force gain, road loads, aerodynamics, aerodynamic forces, Aerodynamics Aids, Rolling Resistance, Vehicle Response Properties, Low-Speed Turning, steady-state cornering, suspension, Anti-Pitch Suspension Geometry, MacPherson Strut, Roll Center Analysis, Solid Axle Roll Centers, Independent Suspension Roll Centers, active suspensions, steering system, Steering Geometry Error, Steering System Forces, Steering System Models, Four-Wheel Steer, rollover, tires, Tire Construction, Camber Thrust, Combined Braking, Cornering, Durability Forces

Fox and McDonald's Introduction to Fluid Mechanics,Eighth Edition

Author: Philip pritchard, John Leylegian

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG309, ENG310

Topics: Fluid Statics, Basic Equations in Integral Form for a Control Volume, Angular-Momentum Principle, Differential Analysis of Fluid Motion, Incompressible Inviscid Flow, Dimensional Analysis, Similitude, Internal Incompressible Viscous Flow, External Incompressible Viscous Flow, fluid machinery, flow in open channels, compressible flow, fluid property data

Applied Petroleum Reservoir Engineering, Third edition

Author: Ronald Terry, Brandon Rogers

School: University of Port Harcourt

Department: Engineering

Course Code: PNG307

Topics: peak oil, rock properties, isothermal compressibilty, gas law, specific gravity, material balance equation, Havlena method, odeh method, single-phase reservoirs, gas reservoir, gas-condensate reservoir, lean gas cycling, water drive, oil reservoir fluid, Kelly-Snyder field, canyon reef reservoir, Gloyd-mitchell zone, Rodessa field, water compressibility, saturated oil reservoir, gas liberation technique, volatile oil reservoir, Darcy's law, permeability, steady-state flow, linear flow, radial flow, transient flow, pseudosteady-state flow, productivity ratio, superposition, drawdown testing, skin factor, buildup testing, water influx, steady-state model, unsteady-state model, Van Everdingen drive model, Hurst Edgewater drive model, bottomwater drive, recovery efficiency, microscopic displacement efficiency, relative permeability, macroscopic displacement efficiency, immiscible displacement process, Buckley-leverett displacement, Oil recovery

Craig's Soil Mechanics, 7th edition

Author: RF Craig

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3304

Topics: Soil mechanics, Soils basic characteristics, Soils nature, Particle size analysis, fine soils plasticity, Soil description, Phase relationships, Soil compaction, Seepage, Soil water, Permeability, Seepage theory, Flow nets, Anisotropic soil conditions, Non-homogenous soil conditions, Transfer condition, Grouting, Frost heave, Effective stress, effective stress principle, Partially saturated soils, Shear strength, Shear failure, Shear strength tests, Sands shear strength, Saturated clays Shear strength, Pore pressure coefficients, Stresses, displacements, Elasticity, Plasticity, Stresses from elastic theory, Displacement from elastic theory, Lateral earth pressure, Rankine's theory of earth pressure, Coulomb's theory of earth pressure, Gravity walls, Embedded walls, Braced excavations, Diaphragm walls, Reinforced soil, Slopes stability, Plane translational slip analysis, long-term stability, Embankment dams, Ground investigation, Borehole logs, Geophysical methods, Ground contamination

Engineering Thermodynamics Work and Heat Transfer ,Fourth edition

Author: Gordon Rogers, Yon Mayhew

School: Rivers State University of Science and Technology

Department: Engineering

Course Code: FEC251

Topics: Engineering Thermodynamics, Work, Heat Transfer, Thermodynamic properties, temperature, Law of Thermodynamics, Non-Flow Processes, Constant volume process, Constant pressure process, Polytropic process, Adiabatic process, Isothermal process, Flow Processes, Nonsteady-flow processes, Boiler, condenser, Throttling, Reciprocating compressor, Cycle efficiency, Reversibility, irreversibility, Exergy, Gibbs function, steady-flow system, Properties of Fluids, Vapour Power Cycles, carnot cycle, rankine cyclel, reheat cycle, regenerative cycle, economiser, air preheater, steam cycles, Gas Power Cycle, gas turbine cycle, Closed-cycle gas turbine, Intercooling, reheating, Combined gas, steam cycles, Reciprocating engine cycles, Heat Pump, Refrigeration Cycles, Reversed Carnot cycle, Practical refrigeration cycles, Water refrigerator, Absorption refrigerators, Gas cycles, Hygrometry, psychrometry

Tests related to Aircraft Flight Principles

Physics (JAMB)

School: WAEC, JAMB & POST UTME

Department:

Course Code: JAMB

Topics: Physics, JAMB, Friction, work, force, motion, speed, velocity, energy, hydraulic press, relative density, hydrometer, gas law, sound wave, wave, light, mirror,capacitor, electricity, pressure