Download STRENGTH OF MATERIALS 2 - ENG306 Past Question PDF

You will find STRENGTH OF MATERIALS 2 past question PDF which can be downloaded for FREE on this page. STRENGTH OF MATERIALS 2 is useful when preparing for ENG306 course exams.

STRENGTH OF MATERIALS 2 past question for the year 2018 examines 300-level Engineering students of FUTO, offering ENG306 course on their knowledge of transverse force equilibrium, column, stress, failure, beam, thin plate

Technical Details
Updated at:
Size: 542.3 KB
Number of points needed for download: 20
Number of downloads: 16

Past Questions related to STRENGTH OF MATERIALS 2

Strength of materials 2

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG306

Topics: Strength of materials, maximum depletion, critical buckling loads, determinate straight beam, determinate curved beam, shear stress, inertia, Ritz method

Materials failure and analysis

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MME509

Topics: Materials failure, material analysis, hydraulic test, creep design, fracture mechanism

Strength of Materials

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG305

Topics: uniaxial stress, biaxial stress, theory of columns, deflection of beams, bending stress, shear force, bending moment, torsion.column, beams

STRENGTH OF MATERIALS

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG305

Topics: force, load, stress, strain, elasticity, plasticity, elastic limit, beam, modulus of resilience, column, cantilever

REINFORCED CONCRETE DESIGN 2-2012-2018

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: STE518

Topics: column, beam, floor, shear, deflection, reinforcement, retaining wall, punching shear, yield line method, flat slab, slab, cantilever, dead load, preliminary design, bearing pressure analysis, stem wall design, stem wall reinforcement, axial load, unaxial moment, slender column

Strength of materials 2016,2017

Year: 2017

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG305

Topics: Shear stress, force, load, normal stress, stress, factor of safety, modulus of elasticity, modulus of rigidity, mohr's circle, beams, cantilever, deflection, deformation, flexural rigidity, columns

Advanced electronic 2

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ECE502

Topics: Advanced electronic, signals transmission, 2-port network, transverse-electromagnetic modes, transverse magnetic modes, electromagnetic compatibility, electromagnetic interference, electromagnetic vulnerability tests, microwave system, 2-cavity klystron amplifiers, magnetron, slow wave structure, reduced attenuation, quarter-wavelength, transformer, attenuation in wave guides, band-pass filter, band mode filter, Iris component equivalent, solid state devices, quantum electronic devices

CONSTRUCTION MANAGEMENT AND ECONOMICS FOR CIVIL ENGINEERING-2016,2017,2018

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: CIE512

Topics: project scheduling, tender, column, bidder, total float, coarse aggregates, column base foundation, ergonomics

INTRODUCTION TO WOODWORK DESIGN

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: CIE335

Topics: seasoning, dowels, drift, bolt, load, stress, fibre stress, proportional limit, modulus of elasticity, beam

DESIGN OF STEEL STRUCTURES

Year: 2013

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ST505

Topics: cantilever beam, column, bolts

Polymer rheology 1

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PTE411

Topics: Polymer rheology, Newtonian fluid, pseudolastric liquids, dilatant fluid, Bingham fluid, casson fluid, rheopectic fluid, thixotropic fluid, stress relaxation, creep deformation, polymer rheology, time-independent fluids, pseudoplastic fluid, Casson fluid, Ostwald-de Waele equation, Maxwell model, Maxwell element, cone-and-plate viscometer, creep formation, rheometers, rheological equation, fluid viscosity, volumetric flow rate

Strength of materials 1

Year: 2019

School: University of Nigeria, Nsukka

Department: Engineering

Course Code: CVE211

Topics: Strength of materials, shear force, bending moment, beam, stress, working stress

Geotechnical engineering

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: CIE522

Topics: Geotechnical engineering, slope stability, seepage forces, soil's shear, pore-water pressure, Fellenius's solution, Bishop's solution, depth of tension crack, retaining wall, foundation criteria, foundation bearing capacity, Rankine active earth pressure coefficient, Rankine passive earth pressure coefficient, embankment dam filter, Meyerhof's theory for failure mechanism, foundation failure

Strength of Materials

Year: 2022

School: Air Force Institute of Technology

Department: Engineering

Course Code: GET208

Topics: Strength of Materials, Stress, strain, stress transformation, torque, bending moments, shear stress, force, moment

Books related to STRENGTH OF MATERIALS 2

Strength of Material, Second Edition

Author: SS Rattan

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3308

Topics: Simple stress, simple strain, Shear stress, Saint-Venant's principle, Stress, strain, Modulus of elasticity, Modulus of Rigidity, Bar elongation, Superposition principle, Tapering section Bars, Elongation due to self-weight, Uniform strength column, Statically indeterminate systems, Temperature stresses, Shrinking on, Strain analysis, Tensile test diagram, Elastic constants, Three-Dimensional stress systems, Compound stress, compound stress, Principal stresses, Maximum shear stresses, Mohr's Stress cycle, Three coplanar stress, Ellipse of Stress, Strain Analysis, Principal Strain, Principal shear strain, Mohr's Strain cycle, Strain Energy, Shear force, Bending moment, Supports types, Bending stress in beams, Simple bending theory, Moment of inertia, Flitched beams, composite beams, Unsymmetrical bending, Ellipse of inertia, Shear stress in beams, Shear stress variation, Built-up beams, Shear centre, Deflection, Beam differential equation, Deflection at a point, Macaulay's method, Moment-Area method, Strain energy due to bending, Castigliano's First theorem, Deflection by castigliano's Theorem, Impact loading on beams, conjugate beam method, Betti's reciprocal deflections theorem, Maxwell's Reciprocal Deflection theorem, Fixed beams, Continuous beams, Fixidity Effects, Clapeyron's three moment equation, Torsion, Springs, Columns, Struts, Failure Theories, Plastic bending, Plane frame structures, Materials properties, Materials testing, Tensile testing, Compression testing, Torsion testing, Hardness testing, Impact testing, Fatigue testing

Applied Strength of Materials, 6th Edition

Author: Robert Mott, Joseph Untener

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3308

Topics: Direct Normal stress, stress, strain, Direct shear stress, Screw Threads, Experimental stress analysis, Computational stress analysis, Fundamental of statics, Materials design properties, Properties of steel, Properties of Cast Iron, Properties of Aluminum, Wood, Concrete, Plastics, Composites, Direct stress, Deformation, Computing design stress, Thermal stress, Bearing stress, Design bearing stress, Twisting, Elastic Torsional Deformation, Torsion, Beam loading, Beams supports, Beam types, Supports reactions, Centroids, Complex shapes centroid, Radius of Gyration, section modulus, Flexure formula, General shear formula, Special shear formulas, Shear flow, Beams deflection, combined stress, Columns, Slenderness Ratio, Buckling formula, Pressure vessels, Bolted connections design, Rivet joints, Eccentrically loaded riveted joints, Eccentrically loaded Bolted joints

Advanced Structural Mechanics

Author: David Johnson

School: Bayero University, Kano

Department: Engineering

Course Code: CIV5304

Topics: Structural Mechanics, Elasticity, Elasticity theory, Stress, Displacements, strains, Plane stress, Stress function solution, Finite element method, Triangular element theory, concrete cube analysis, Finite element types, Eight-nodded isoperimetric element, Assessment of solution accuracy, Plain strain, Torsion, Torsion behavior, Solid sections, Circular sections, Non-circular sections, Finite difference solutions, solution comparison methods, solid sections properties, Thin-walled sections, singly closed sections, open sections, Plates, slabs, Beam analogy, Grid analogy, Poisson's ratio effect, Elastic plate theory, Moments, curvatures, Equilibrium, General elastic plate equation, Boundary conditions, Thin shells, Axisymmetric shells Membrane theory, Circular cylindrical shells bending, Structural dynamics, Vibration Types, Free, undamped vibration, Free, damped vibration, Forced, damped vibration, Beams Analysis

Strength of materials

Author: Barry dupen

School: University of Benin

Department: Engineering

Course Code: CVE211

Topics: Strength of materials, stress, strain, Poisson's ratio, thermal expansion, shear stress, thermal stress, pressure vessels, stress concetrations, Thin-Walled Pressure Vessels, Bolted Welded Joints, Welded Joints, centroid, centroidal area, Radius of Gyration, Beam Reactions, Shear Diagrams, Moment Diagrams, Beam Deflection, beam design, Combined Stresses, Eccentric Loading, Buckling of Columns, columns, steel machine parts, Mohr's Circle

Strength of materials, Fifth edition

Author: RK Rajput

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG305

Topics: stress, strain, centroid, inertia, bending moment, shear force, deflection of beams, fixed beam, continous beam, thin shells, joint, shafts, spring, column, struts

Petroleum Related Rock Mechanics, 2nd edition

Author: Fjaer, RM Holt, Horsrud, AA Raaen, Risnes

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET415

Topics: elasticity, stress, strain, elastic moduli, strain energy, thermoelasticity, poroelasticity, anisotropy, nonlinear elasticity, failure mechanics, tensile failure, shear failure, compaction failure, underground stress, pore pressure, sedimentary rocks, borehole failure criteria, rock mechanics, rock acoustics, reflections refractions, borehole acoustics, seismic, rock models, grain pack models, fractured rocks, unstable boreholes, time-delayed borehole failure, hydraulic fracturing, reservoir geomechanics, compaction, subsidence, well problems

Reinforced Concrete Design To Eurocode 2

Author: Bill Mosley, John Bungey, Ray Hulse

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3307

Topics: Reinforced Concrete Design, Design processes, composite action, stress-strain relations, shrinkage, thermal movement, creep, materials specification, Limit state design, Characteristics material strengths, Combination of actions, Load combinations, Beams analysis, Frames Analysis, Shear wall structures resisting horizontal loads, Moments redistribution, Rectangular-parabolic stress block, Triangular stress block, Shear, bond, Torsion, Anchorage bond, span-effective depth ratio, deflection calculation, flexural cracking, Thermal cracking, Shrinkage cracking, Reinforced concrete beams design, Reinforced concrete slabs design, Column design, column classification, slender column design, Foundations design, Retaining walls design, Prestressed concrete, Water-retaining structures, composite construction, Footings, Reinforcement details, Shear connector design

Strength of Materials and Structures

Author: John Case, Lord Chilver, Carl Ross

School: University of Nigeria, Nsukka

Department: Engineering

Course Code: CVE212

Topics: Tension, compression, direct stresses, Pin-jointed frames, Pin-jointed trusses, Shearing stress, joints, connections, Bending moment, shearing force, centroid, bending stress, Built-in beam, continuous beam, Energy methods, plate differential methods, matrix algebra, finite element method, Structural vibrations

Prestressed Concrete A Fundamental Approach, Fifth edition

Author: Edward Nawy

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: STE509

Topics: fiber stress, stress-strain curve of concrete, creep, shrinkage, nonprestressing reinforcement, ACI Maximum permissible stress, AASHTO maximum permissible stress, circular prestressing, elastic shortening of concrete, steel stress relaxation, creep loss, shrinkage loss, anchorage-seating loss, service-load design, composite beam, ultimate-strength flexural design, shear strength, torsional strength, web-shear reinforcement, dowel reinforcement, torsional behavior, indeterminate frame, indeterminate portal, camber, deflection, crack control, prestressed compression, tension member, LRFD, seismic shear

Strength of materials material

Author: GRANIT CHIKA

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG305

Topics: Tensile stress, Compressive test, Strain, deformation, force, load, shearing forces, bending moments, beam, bending stress, flexural stress, colums, torsion, Strength of materials

Introduction to strength of materials, fourth edition

Author: RK Bansal

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG305

Topics: stress, strain, elastic constant, strain energy, shear force bending moment, center of gravity, moment of inertia, bending stress, deflection of beam, dam, deflection of cantilever

An Instructor’s Solutions Manual to Accompany Engineering Mechanics statics, 4th edition

Author: Andrew Pytel, Jaan Kiusalaass

School: University of Benin

Department: Engineering

Course Code: MEE211

Topics: statics, Newtonian mechanics, force systems, force, couples, coplanar force systems, coplanar equilibrium analysis, equilibrium, Three-dimensional equilibrium, free-body diagrams, independent equilibrium equations, beams, cables, dry friction, ropes, flat belt, disk friction, rolling resistance, centroids, distributed loads, moments, Mohr's circle, virtual work, potential energy, virtual displacements

Engineering Mechanics, Statics 4th edition

Author: Andrew Pytel, Jaan Kiusalaass

School: University of Benin

Department: Engineering

Course Code: MEE211

Topics: statics, Newtonian mechanics, force systems, force, couples, coplanar force systems, coplanar equilibrium analysis, equilibrium, Three-dimensional equilibrium, free-body diagrams, independent equilibrium equations, beams, cables, dry friction, ropes, flat belt, disk friction, rolling resistance, centroids, distributed loads, moments, Mohr's circle, virtual work, potential energy, virtual displacements

Applied mechanics, 3rd edition

Author: Hannah, MJ Hillier

School: Federal University, Oye-Ekiti

Department: Engineering

Course Code: MEE203

Topics: Applied mechanics, statics, mass, force, weight, couple, frameworks, friction, square-threaded screw, tribology, average speed, constant speed, velocity, free falling bodies, inertia, Variable forces, Periodic Motion, Simple harmonic motion, Car wheel balancing, Periodic time, simple pendulum, resonance, Angular acceleration, Centripetal acceleration, Centripetal force, Centrifugal force, Dynamic instability, balancing, static balance, dynamic balance, springs, energy, kinetic energy, potential energy, impulse, momentum, Impulsive forces, Inelastic collisions, aircraft, rockets, Reaction propulsion, Jet propulsion aircraft, Helicopters, Rocket propulsion, thrust, Ductile metals, metal, alloy, Shear Force, Bending Moment, Bending moment diagram, Poisson's ratio, stress, strain, Strain energy, Combined loading, Combined Bending, Direct Stress, fluid, pressure, Experimental Errors, discrepancy, error

Machine design lecture note

Author: ENG311

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG311

Topics: force systems, stress, stress analysis, stress concentration, fits, limits, tolerances, fasteners, square key, flat key, pins, bolts, screw, rivets, steel washers, welding, brake selection, bending moment

Tensile Testing, second edition

Author: JR Davis

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG208

Topics: Tensile Testing, Stress-Strain Curve, stress, strain, Ductility, Anisotropy, Tensile Loads, Uniaxial Tensile Testing, Tensile Testing Equipment, Strain Sensors, Gripping Techniques, Environmental Chambers, Product Design, Hardness-Strength Correlation, elastic modulus, mechanical testing, Sheet Formability, Formability Tests, Plane-Strain Tensile Testing, Anelasticity, Proportional Limit, damping, Fracture Characterization, Yield Point, Elastomers, plastic, ceramic, ceramic-matrix, Fiber-Reinforced Composites, High-Strain Rates, Hot Tensile Testing, temperature control, High Strain Rate Tensile Testing, Conventional Load Frames, Expanding Ring Test, Flyer Plate Loading, Short Duration Pulse Loading, Split-Hopkinson Pressure Bar Technique, Rotating Wheel Test

Applied Mechanics ,3rd edition

Author: RK Rajput

School: University of Uyo

Department: Engineering

Course Code: ENG211

Topics: Applied Mechanics, force, force systems, free body diagrams, resultant force, moments, Varignon’s Theorem, centre of gravity, centroid, Moment of Inertia, friction, Screw Friction, rectilinear motion, Velocity-Time Graphs, Displacement-Time Graphs, laws of motion, impulse, D’alembert’s Principle, work, power, energy, simple machine, Weston’s Differential Pulley Block, circular motion, Centrifugal force, Centripetal Force, curvilinear motion, stress, strain, Hooke's law, tensile test, Strain Hardening, Poisson’s Ratio

Properties and strength Of Materials

Author: Muhannad Zedan

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3308

Topics: strength Of Materials, Simple stress, simple strain, Elastic materials, Hooke's law, Modulus of elasticity, Young's modulus, Brittle materials, Poisson's ratio, Shear stress, Modulus of rigidity, Double shear, Temperature stresses, Compound bar, Cantilever beams, Simple beams, Shear force, bending moment, Shear force diagram, bending moment diagram, Torsion, Crystalline structure, Metals crystalline structure, Atomic bonding, crystal structure, Body-centered cubic structure, Face-centered cubic structure, Hexagonal close-packed structure, grain structure, grain boundary, polymorphism, Slope of beams, deflection of beams, Fatigue, creep, Fracture, Creep test, Fracture mechanics, Linear fracture mechanics, Griffith's fracture criterion

Reinforced Concrete Structures Analysis and Design

Author: David Fanella

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: STE403, STE518

Topics: reinforced concrete, building code, building standard, reinforcement, loading, moment distribution, strength, serviceability, flexural member, compression member, tension member, axial load, two-way slab, column, preliminary column sizing, slenderness effect, biaxial loading, wall, foundation, footing, mat foundation

Design of Structural Elements

Author: WMC McKenzie

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3307

Topics: Structural elements design, Structural Analysis Techniques, Shear Force, Bending moment, Shear force diagram, Bending moment diagram, Deflection of Beams, Elastic Shear stress distribution, Elastic Bending stress distribution, Transformed sections, Moment distribution, Bending stiffness, Rotational Stiffness, Carry-over moment, Pinned End, Free Moments, Fixed bending moments, Distribution Factors, Design Philosophies, Permissible stress Design, Load Factor Design, Limit State Design, Design codes, Eurocodes, National Annex, Structural Loading, Dead loads, Imposed loads, Imposed roof loads, Floor load distribution, Load distribution, Structural Instability, Overall Stability, Robustness, Reinforced concrete Element's Design, Structural Steelwork Elements' Design, Structural Timber Elements' Design.

Tests related to STRENGTH OF MATERIALS 2

Physics (JAMB)

School: WAEC, JAMB & POST UTME

Department:

Course Code: JAMB

Topics: Physics, JAMB, Friction, work, force, motion, speed, velocity, energy, hydraulic press, relative density, hydrometer, gas law, sound wave, wave, light, mirror,capacitor, electricity, pressure