Download MULTIPLE PHASE FLOW IN PIPES - PET517 Past Question PDF

You will find MULTIPLE PHASE FLOW IN PIPES past question PDF which can be downloaded for FREE on this page. MULTIPLE PHASE FLOW IN PIPES is useful when preparing for PET517 course exams.

MULTIPLE PHASE FLOW IN PIPES past question for the year 2019 examines 500-level Engineering students of FUTO, offering PET517 course on their knowledge of phase flow, flow regime, map, condensation, boiling

Technical Details
Updated at:
Size: 525.05 KB
Number of points needed for download: 17
Number of downloads: 21

Past Questions related to MULTIPLE PHASE FLOW IN PIPES

Multiple phase flow in pipes

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET517

Topics: Pipe Multiple phase flow, multiphase heat transfer, stratified flow, Taylor bubbles, slug-free flow, Taitel-Dukler flow regime models, boiling, condensation, evaporation, fluid transportation, Boiling regimes, natural convection boiling, nucleate boiling, transition boiling, film boiling, total pressure drop equation

MAPS AND MAP INTERPRETATION

Year: 2019

School: Federal University of Technology, Owerri

Department: Science and Technology

Course Code: GLY307

Topics: map, topographic map, geological map, rock

Natural gas engineering

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET521

Topics: Natural gas engineering, dew point curve, bubble point curve, cricondenbar, cricodentherm, dry gas phase behavior, wet gas phase behavior, retrograde phase behavior, iron sponge sweetening, alkanol amine sweetening, glycol process, amine process, natural gas field processing

ENGINEERING PROPERTIES OF BULK POLYMER-2016&2019

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PTE405

Topics: polymer crystallization, crystallinity, crystallization, Avrani equation, dilatometer, plastic, resin, elastomer, rubber, phase state, phase transition, fringed miscell theory, crystallites theory, folded chain theory, linear polymers

Heat and mass transfer-2012&2018

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG304

Topics: heat transfer, convection, condensation, heat, heat exchanger

Petroleum production engineering 1

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET306

Topics: Petroleum production engineering, critical point, cricondentherm, cricodenbar, retrograde condensation, dry gas reservoir, wet gas reservoir, bubble point curve, dew point curve, Gas condensate, Standing-Katz solutions, constant composition expansion test, differential liberation experiment, isothermal compressibility, Bubble point pressure, gas solubility, crude oil viscosity, crude oil density, bottomhole completion, Darcy's law, oil production

Reservoir Engineering 2011, 2012, 2015, 2016 & 2018

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET403

Topics: Reservoir Engineering, retrograde condensation, reservoir barrel, stock tank barrel, reservoir pore volume hydrocarbon pore volume, high shrinkage oil, low shrinkage oil, oil formation volume factor, solution gas-oil ration

RESERVOIR MODELLING AND SIMULATION

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET505

Topics: reservoir, simulation, phase flow, finite-difference, gas, well

BASIC GEOLOGY-2012,2013,2014&2018

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET204

Topics: migration, well, rock, mineral, basin, dip, strike, heave, throw, slip, hanging well, foot well, weathering, map, geochronology, geologic time scale, dating, faunal succession, angular unconformity

PETROLEUM GEOLOGY-2018&2019

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET317

Topics: log, gamma ray, spectra, reservoir, hydrocarbon, saturation, trap, porosity, rock, survey, oil, map, formation

DIGITAL SYSTEMS AND PLCs

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: MCE409

Topics: logic gate, karnaugh map, sequential logic system, seven segment display, JK flip flos, programmable logic controller, digital coding system

Reservoir modelling and simulation

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET505

Topics: Reservoir modelling, reservoir simulation, history matching, history matching optimization, reservoir simulation study process, history matching parameters, oil phase partial differential equation, Gaussian elimination method, finite difference approximation, Taylor series expansion, tri-diagonal matrix, incompressible flow equation

Fluid mechanics 2013,2014&2015

Year: 2015

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG309

Topics: pressure, free surface, Reynolds number, bulk modulus, turbulent flow, steady flow, cavitation, shear, orfice, kinetic energy, potential flow, incompressibility of fluid

Open channel hydraulics

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: SWE405

Topics: Open channel hydraulics, open channel flow, pipe flow, lined canal water carrying capacity, mean flow velocity, lined canal trapezoidal, permissible velocity range, Manning's coefficient, critical depth, critical velocity, trapezoidal grassed channel design

Books related to MULTIPLE PHASE FLOW IN PIPES

Map Reading and Interpretation

Author: FOA Dada

School: University of Ibadan

Department: Science and Technology

Course Code: GEO282

Topics: Map Reading, Map Interpretation, Language of Maps, Drainage Basins, settlement, land use, land use analysis, Distributional Map, Geological Map, climate map, Weather Map

Fundamentals of heat and mass transfer, 7th Edition

Author: Theodore Bergman, Adrienne Lavine, Frank Incropera, David DeWitt

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG304, MEE413

Topics: Conduction, Steady-State Conduction, Transient Conduction, Convection, external flow, internal flow, free convection, boiling, condensation, heat exchanger, radiation, diffusion mass transfer, Thermophysical Properties of Matter, Convection Transfer Equations

Fundamentals of heat and mass transfer, 7th Edition Instructors Solution manual

Author: Theodore Bergman, Adrienne Lavine, Frank Incropera, David DeWitt

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG304, MEE413

Topics: Conduction, Steady-State Conduction, Transient Conduction, Convection, external flow, internal flow, free convection, boiling, condensation, heat exchanger, radiation, diffusion mass transfer, Thermophysical Properties of Matter, Convection Transfer Equations

Heat and Mass Transfer, Fifth edition

Author: RK Rajput

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG304, MEE413

Topics: heat transfer, thermodynamics, path function, heat conduction, dielectric heating, conduction unsteady state, hydrodynamics, stream function, laminar flow, turbulent flow, dimensional analysis, forced convection, free convection, boiling, condensation, heat exchangers, thermal radiation, mass transfer

Principles of Chemical Engineering Processes Material and Energy Balances

Author: Nayef Ghasem, Redhouane Henda

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: CHE202

Topics: Chemical Engineering Processes, Material Balance, Energy Balance, temperature measurement, temperature conversion, dimensional homogeneity, dimensionless quantities, process flow sheet, process unit, process streams, mass flow rates, volumetric rates, moles, molecular weight, stream composition, mass fraction, mole fraction, concentration, pressure measurement, pressure-sensing devices, process units, degrees of freedom analysis, process flow diagram, multiunit process flow diagram, mass balance, Stoichiometric Equation, Stoichiometric Coefficients, Stoichiometric Ratio, Limiting Reactant, Excess Reactants, Combustion Reactions, Chemical Equilibrium, Multiple-Unit Process Flowcharts, Single-Phase Systems, Multiphase Systems, Ideal Gas Equation of State, liquid density, solid density, gas density, Real Gas Relationships, Compressibility Factor, Virial Equation of State, van der Waals Equation of State, Soave–Redlich–Kwong Equation of State, Kay’s Mixing Rules, phase diagram, Vapor–Liquid Equilibrium Curve, Vapor Pressure Estimation, Clapeyron Equation, Clausius–Clapeyron Equation, Cox Chart, Antoine Equation, Partial Pressure, Dalton’s Law of Partial Pressures, Gibbs’ Phase Rule, Bubble Point, Dew Point, Critical Point, Kinetic Energy, Potential Energy, energy balance, steam turbine, heaters, coolers, compressors, Mechanical Energy Balance, Enthalpy Calculations, Constant Heat Capacity, Psychrometric Chart, Heat of Reaction, Heats of Formation, Heat of Combustion, Heat of Reaction Method, Unsteady-State Material Balance, Unsteady-State Energy Balance

Solutions Manual for Heat and mass transfer,Fifth edition

Author: Yunus cengel, Afshin Ghajar

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG304, MEE413

Topics: Heat Conduction Equation, Steady Heat Conduction, Transient Heat Conduction, Numerical Methods in Heat Conduction, External Forced Convection, Fundamentals of Convection, Internal Forced Convection, Natural Convection, convection, Boiling, Condensation, Heat Exchangers, Thermal Radiation, Radiation Heat Transfer, Cooling of Electronic Equipment, Heating of Buildings, Cooling, of Buildings, Refrigeration of Foods, Freezing of Foods

Heat and mass transfer with web chapters,Fifth edition

Author: Yunus cengel, Afshin Ghajar

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG304, MEE413

Topics: Heat Conduction Equation, Steady Heat Conduction, Transient Heat Conduction, Numerical Methods in Heat Conduction, External Forced Convection, Fundamentals of Convection, Internal Forced Convection, Natural Convection, convection, Boiling, Condensation, Heat Exchangers, Thermal Radiation, Radiation Heat Transfer, Cooling of Electronic Equipment, Heating of Buildings, Cooling, of Buildings, Refrigeration of Foods, Freezing of Foods

Heat Transfer

Author: Peter von Böckh, Thomas Wetzel

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET310

Topics: Heat Transfer, thermal conduction, forced convection, free convection, condensation, boiling heat transfer, thermal radiation, heat exchangers

Fluid mechanics and hydraulics

Author: Mahesh kumar

School: Chukwuemeka Odumegwu Ojukwu University

Department: Engineering

Course Code: ENG232

Topics: fluid pressure, hydrostatic forces, submerged surfaces, buoyancy, floatation, fluid kinematics, fluid dynamics, vortex flow, potential flow, ideal fluid flow, laminar flow, viscous flow, boundary layer theory, compressible flow, model similitude, free jets, fluid machines, pelton turbine, impulse turbine, francis turbine, radial flow reaction turbines, propeller, kaplan turbine, axial flow reaction turbines, hydraulic turbines, centrifugal pumps, reciprocation pumps, hydraulic systems, fluid continuum, fluid properties, specific weight, weight density, viscosity, perfect gas law, isobaric process, adiabatic process, surface tension, capillarity, capillary effect, vapour pressure, cavitation, pascal's law, hydrostatic law, Bouyant force, centre of buoyancy, archimedes principle, metacentre, metacentric height, cauchy-reimann equations, Euler's equation, Bernoulli's equation, continuity equation, orfices, hydraulic coefficients, uniform flow, source flow, sink flow, free vortex flow, notches, weirs, francis formula, bazin formula, rehbock formula, cipolletti weir, reynolds experiment, Navier-stoke equation, efflux viscometer, ogee weir, boundary layers, stagnation pressure, stagnation density, stagnation temperature, specific energy curve, critical depth, critical velocity, sub-critical flow, hydraulic jump, francis turbine, velocity triangle, draft tube, rotodynamic turbine

Unit Operations of Chemical Engineering, 5th edition

Author: Warren McCabe, Julian Smith, Peter Harriott

School: Institute of Management Technology

Department: Engineering

Course Code: CHE303

Topics: Fluid Mechanics, Fluid-Flow Phenomena, Equations of Fluid Flow, Flow of Incompressible Fluids, Flow of Compressible Fluids, Flow past immersed bodies, Transportation of fluids, Metering of fluids, Agitation of liquids, mixing of liquids, Heat transfer, heat flow in fluids, Heat transfer to fluids without phase change, Heat transfer to fluids with phase change, Radiation heat transfer, Heat exchange equipment, Evaporation, Equilibrium stage operations, Distillation, multicomponent distillation, Leaching, Extraction, Diffusion, Mass Transfer between Phases, Gas Absorption, Humidification Operations, Drying of Solids, Adsorption, Membrane Separation Processes, Crystallization, Properties of Particulate Solids, Handling of Particulate Solids, Mixing of Particulate Solids, Mechanical Separations

A Textbook of Fluid Mechanics and hydraulic machines, 9th edition

Author: RK bansal

School: Covenant University

Department: Engineering

Course Code: CVE332

Topics: Fluid Mechanics, hydraulic machines, viscosity, compressibility, bulk modulus, surface tension, capillarity, vapor pressure, cavitation, Pascal's law, manometers, Piezometer, differential manometer, isothermal process, buoyancy, flotation, meta-center, fluid flow, continuity equation, velocity, acceleration, velocity potential function, stream function, equipotential line, Vortex flow, ideal flow, potential flow, momentum equation, free liquid jets, orifices, mouthpieces, notches, weirs, viscous flow, turbulent flow, Reynolds experiment, dimensional homogeneity, model analysis, dimensionless numbers, Boundary layer flow, compressible flow, Mach number, Jet propulsion, hydraulic machines, turbines, Pelton wheel, Radial flow reaction turbines, Francis turbine, axial flow reaction turbine, Draft tube, specific speed, unit quantities, centrifugal pumps, cavitation, maximum suction lift, net positive suction head, reciprocating pumps, air vessels, fluid system, hydraulic press, hydraulic accumulator, hydraulic intensifier, hydraulic ram, hydraulic lift, hydraulic crane, hydraulic coupling, hydraulic torque converter, air lift pump, gear-wheel pump

Electrical electronic engineering studio

Author: Ray

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: EEE 302

Topics: diode, rectifier, capacitance, capacitor, transformer, phase, single phase, three phase, cable, cord, wire, earthing, fuse

Electric Machinery Fundamentals instructors solution manual

Author: stephen chapman

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PSE 312

Topics: Machinery Principles, Transformers, AC, machine, Generator, motor, DC, single phase, three phase, phase, coil, winding, power electronics

Electric Machinery Fundamentals

Author: stephen chapman

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PSE 312

Topics: Machinery Principles, Transformers, AC, machine, Generator, motor, DC, single phase, three phase, phase, coil, winding, power electronics

Materials Science and Engineering An Introduction,10th edition

Author: William Callister, David Rethwish

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: atomic structure, interatomic bonding, crystalline solids, crystals, atomic bonding, diffusion, dislocation, strengthening mechanisms, failure, mechanical properties, phase diagrams, phase transformations, alloy, ceramic, polymer, corrosion, degradation, composites, polymer synthesis, polymer processing, oxidation, electrical properties, magnetic properties, optical properties, thermal properties, unit cell, density computation, Polymorphism, Allotropy, Crystallographic points, Crystallographic directions, polycrystalline materials, anisotropy, X-ray diffraction, plastic deformation, point defects, atomic vibration, fick's law, Stress–Strain Behavior, Anelasticity, fatigue, creep, solubility limit, phase equilibria

Materials Science and Engineering, An Introduction ,8th Edition Solution Manual

Author: William Callister

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: atomic structure, interatomic bonding, crystalline solids, crystals, atomic bonding, diffusion, dislocation, strengthening mechanisms, failure, mechanical properties, phase diagrams, phase transformations, alloy, ceramic, polymer, corrosion, degradation, composites, polymer synthesis, polymer processing, oxidation, electrical properties, magnetic properties, optical properties, thermal properties, unit cell, density computation, Polymorphism, Allotropy, Crystallographic points, Crystallographic directions, polycrystalline materials, anisotropy, X-ray diffraction, plastic deformation, point defects, atomic vibration, fick's law, Stress–Strain Behavior, Anelasticity, fatigue, creep, solubility limit, phase equilibria

The Science and Engineering of Materials ,Seventh Edition

Author: Donald Askeland, Wendelin Wright

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: Materials Design, Atomic Structure, Atomic Bonding, interatomic spacing, amorphous materials, lattice, basis, unit cells, crystal structure, Allotropic Transformation, Polymorphic Transformation, Crystal Structures, unit cell, Covalent Structures, diffusion, Fick’s Law, Mechanical Properties, Tensile Test, stress, strain, Nanoindentation, Fracture Mechanics, Fatigue, Fatigue Test, creep, rupture, stress corrosion, Strain Hardening, Annealing, Hot Working, Nucleation, cooling curves, cast structure, casting, Directional Solidification, Single Crystal Growth, Epitaxial Growth, Phase Diagram, Phase Equilibrium, Dispersion Strengthening, Eutectic Phase Diagrams, Eutectoid Reaction, Martensitic Reaction, Tempering, Nonferrous Alloys, Glass-Ceramics, Polymers, Polymerization, Thermoplastics, elastomers, rubbers, adhesives, Composites, Particulate Composites, Fiber-Reinforced Composites, plywood, concrete, asphalt, Electronic Materials, semiconductors, insulators, Electrostriction, Piezoelectricity, Ferroelectricity, Magnetic Materials, Magnetization

The science and engineering of materials Instructors‘ Solution Manual, Fourth Edition

Author: Frank Askeland, Pradeep Phulé, Gregory Lea

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG207, ENG208

Topics: Materials Design, Atomic Structure, Atomic Bonding, interatomic spacing, amorphous materials, lattice, basis, unit cells, crystal structure, Allotropic Transformation, Polymorphic Transformation, Crystal Structures, unit cell, Covalent Structures, diffusion, Fick’s Law, Mechanical Properties, Tensile Test, stress, strain, Nanoindentation, Fracture Mechanics, Fatigue, Fatigue Test, creep, rupture, stress corrosion, Strain Hardening, Annealing, Hot Working, Nucleation, cooling curves, cast structure, casting, Directional Solidification, Single Crystal Growth, Epitaxial Growth, Phase Diagram, Phase Equilibrium, Dispersion Strengthening, Eutectic Phase Diagrams, Eutectoid Reaction, Martensitic Reaction, Tempering, Nonferrous Alloys, Glass-Ceramics, Polymers, Polymerization, Thermoplastics, elastomers, rubbers, adhesives, Composites, Particulate Composites, Fiber-Reinforced Composites, plywood, concrete, asphalt, Electronic Materials, semiconductors, insulators, Electrostriction, Piezoelectricity, Ferroelectricity, Magnetic Materials, Magnetization

Fluid Mechanics and hydraulic

Author: RK Rajput

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG309

Topics: Properties of fluid, pressure measurement, Hydrostatic forces on surfaces, Buoyancy, flotation, Fluid Kinematics, Fluid Dynamics, Dimension analysis, model analysis, Flow through orfices, flow through Mouthpieces, Flow Over notches, Flow Over weirs, laminar flow, turbulent flow

Fluid mechanics

Author: IO Arukalam

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG309

Topics: fluid resistance, Reynolds number, newtonian and non-newtonian fluid flow, laminar flow analysis, turbulent flow analysis, Newtonian fluids, non-newtonian fluids, fluid resistance, fluid resistance equation, laminar flow, turbulent flow, Reynolds number, unsteady fluid flow

Novrazbb Yotjob distinctquote yourowndir muttcat scholarship carlesto newsfunt