Applied Petroleum Reservoir Engineering, Third edition by Ronald Terry, Brandon Rogers PDF free download

Ronald Terry, Brandon Rogers Applied Petroleum Reservoir Engineering, Third edition PDF, was published in 2014 and uploaded for 300-level Engineering students of University of Port Harcourt (UNIPORT), offering PNG307 course. This ebook can be downloaded for FREE online on this page.

Applied Petroleum Reservoir Engineering, Third edition ebook can be used to learn peak oil, rock properties, isothermal compressibilty, gas law, specific gravity, material balance equation, Havlena method, odeh method, single-phase reservoirs, gas reservoir, gas-condensate reservoir, lean gas cycling, water drive, oil reservoir fluid, Kelly-Snyder field, canyon reef reservoir, Gloyd-mitchell zone, Rodessa field, water compressibility, saturated oil reservoir, gas liberation technique, volatile oil reservoir, Darcy's law, permeability, steady-state flow, linear flow, radial flow, transient flow, pseudosteady-state flow, productivity ratio, superposition, drawdown testing, skin factor, buildup testing, water influx, steady-state model, unsteady-state model, Van Everdingen drive model, Hurst Edgewater drive model, bottomwater drive, recovery efficiency, microscopic displacement efficiency, relative permeability, macroscopic displacement efficiency, immiscible displacement process, Buckley-leverett displacement, Oil recovery.

Technical Details
Updated at:
Size: 14.5 MB
Number of points needed for download: 62
Number of downloads: 27

Books related to Applied Petroleum Reservoir Engineering, Third edition

Reservoir Engineering

Author: Sylvester Okotie, Bibobra Ikporo

School: Federal University of Petroleum Resources, Effurun

Department: Engineering

Course Code: PNG410

Topics: Reservoir Engineering, reservoir, reservoir geometry, phase envelope, unsteady flow, productivity index, relative permeability behavior, oil formation volume factor, hydrocarbon reserves, volumetric reserves estimation, contour, condensate reservoir calculation, water influx, aquifer influs, aquifer models, pot aquifer model, Schilthuis model, Hurst modified steady-state model, Van Everdingen moder, Carter-Tracy model, Fetkovich Aquifer model, material balance, reservoir drive mechanisms, gas cap expansion drive, rock compressibility, connate water expansion drive, gas drive reservoir, water drive reservoir, decline curve analysis, pressure regimes, fluid contacts, inflow performance relationship, history matching, pressure match, reservoir performance prediction

Basic petroleum geology

Author: Peter Link

School: Federal University of Petroleum Resources, Effurun

Department: Engineering

Course Code: PEE315

Topics: earth structure, lithosphere, mantle, core, specific gravity, Earth's magnetic field, plate tectonics, continental drift, continental margin, geologic time, historical geology, stratigraphy, relative time, absolute time, radiometric time scale, geologic time scale, palentology, Minerals, rocks, weathering, erosion, deposition, Marine erosion, Marine deposition, depositional basin, Lacustrine environment, Desert environment, Glacial Environment, subsurface water, Diagenesis, structural geology, petroleum traps, petroleum, reservoir, recovery techniques, exploration techniques, igneous rock, sedimentary rock, metamoprphic rock, rock cycle, mechanical weathering, chemica weathering, weathering products, downslope movement, floodplain deposits, delta deposits, stream deposits, Marine depth zones, Marine currents, wave types, wave refraction, erosional features, marine shoreline, marine deposition, Basin, Lake basin, lacustrine deposition, lacustrine deposits, desert erosion, desert deposition, desert deposits, Glacier, glacial deposition, glacial deposits, groundwater classification, aquifer, water table, water well, ground water processes, groundwater products, lithification, induration, diagenesis, fracturing, stress, strain, faults, folds, strike, dip, superposition, decriptive geometry, stereographic projection, hydrocarbon traps, structural traps, stratigraphic traps, combination traps, unconformity traps, crude oil, natural gas, reservoir performane, reservoir pressure, resevoir loss, reservoir destruction, reservoir rocks, clastic reservoirs, carbonate reservoirs, seals, pressure-data, geometry, fluid content, Rock sampling, fluid flow, porosity, permeability, reservoir properties, surface geology, surface data, surface geology, drilling operations, well cuttings, cores, electric logging, radioactivity logging, acousting logging, sonic logging, spontaenous potential logs, self potential logs, resistivity logs, induction logs, dual induction-focused logs, electrode logs, radioactivity logs, acoustic logs, drill stem tests, geophysical surveys, geochemical surveys, maps, cross-sections

Reservoir Engineering Handbook

Author: Tarek Ahmad

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET304, PET403, PET502

Topics: Reservoir Fluid Behavior, Reservoir-Fluid Properties, Reservoir Fluids, Rock Properties, Relative Permeability Concepts, Reservoir Fluid Flow, Oil Well Performance, Gas and Water Coning, Water Influx, Oil Recovery Mechanisms, Material Balance Equation, Oil Reservoir Performance, Gas Reservoirs, Waterflooding, Vapor-Liquid Phase Equilibria

Principles of Chemical Engineering Processes Material and Energy Balances

Author: Nayef Ghasem, Redhouane Henda

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: CHE202

Topics: Chemical Engineering Processes, Material Balance, Energy Balance, temperature measurement, temperature conversion, dimensional homogeneity, dimensionless quantities, process flow sheet, process unit, process streams, mass flow rates, volumetric rates, moles, molecular weight, stream composition, mass fraction, mole fraction, concentration, pressure measurement, pressure-sensing devices, process units, degrees of freedom analysis, process flow diagram, multiunit process flow diagram, mass balance, Stoichiometric Equation, Stoichiometric Coefficients, Stoichiometric Ratio, Limiting Reactant, Excess Reactants, Combustion Reactions, Chemical Equilibrium, Multiple-Unit Process Flowcharts, Single-Phase Systems, Multiphase Systems, Ideal Gas Equation of State, liquid density, solid density, gas density, Real Gas Relationships, Compressibility Factor, Virial Equation of State, van der Waals Equation of State, Soave–Redlich–Kwong Equation of State, Kay’s Mixing Rules, phase diagram, Vapor–Liquid Equilibrium Curve, Vapor Pressure Estimation, Clapeyron Equation, Clausius–Clapeyron Equation, Cox Chart, Antoine Equation, Partial Pressure, Dalton’s Law of Partial Pressures, Gibbs’ Phase Rule, Bubble Point, Dew Point, Critical Point, Kinetic Energy, Potential Energy, energy balance, steam turbine, heaters, coolers, compressors, Mechanical Energy Balance, Enthalpy Calculations, Constant Heat Capacity, Psychrometric Chart, Heat of Reaction, Heats of Formation, Heat of Combustion, Heat of Reaction Method, Unsteady-State Material Balance, Unsteady-State Energy Balance

Concrete Technology Theory and Practice, Multicolour Edition

Author: MS Shetty

School: Bayero University, Kano

Department: Engineering

Course Code: CIV5307

Topics: Concrete technology, Cements, Modern cements history, Portland cement manufacturing, Portland cement wet process manufacturing, Portland cement dry process manufacturing, Cement chemical composition, Cements hydration, Heat of hydration, Calcium silicate hydrates, Calcium hydroxide, calcium aluminate hydrates, hydrated cements structure, Water requirement for hydration, Cement types, ASTM cements classification, Ordinary Portland cement, Rapid hardened cement, Extra rapid hardening cement, Portland slag cement, Quick setting cement, super sulphated cement, low heat cement, Portland pozzolana cement, coloured cement, hydrophobic cement, masonry cement, expansive cement, Cement testing, Aggregates, aggregates testing, Aggregates form igneous rock, aggregates from sedimentary rocks, aggregates from metamorphic rock, aggregate crushing value, aggregates impact value, aggregate abrasion value, Deval attrition test, Dorry Abrasion test, Los Angeles test, modulus of elasticity, bulk density, specific gravity, Sieve analysis, Aggregates testing, Water, water qualities, Sea water for mixing concrete, Admixture, construction chemicals, Plasticizers, water reducers, Workability, Plasticizers action, Superplasticizers classification, Factors affecting workability, Superplasticizers types, Fresh concrete, Fresh concrete water content, Fresh concrete mix proportions, Aggregates sizes in fresh concrete, Aggregates shape, Surface texture, Admixture use in fresh concrete, Workability measurement, Slump test, k-slump test, aggregates grading, compacting factor test, flow test, flow table apparatus, vee bee consistometer test, setting of concrete, Manufacture of concrete process, Concrete compaction, Concrete curing, Concrete strength, Water-cement ratio, Strength gaining with age, Concrete maturity concept, Bond strength, High strength concrete, Elasticity, Creep, Shrinkage, Aggregates elastic properties, Modulus of Elasticity, Dynamic modulus of elasticity, Poison's ratio, Creep rheological representation, Creep measurement, Factors affecting creep, Aggregate influence, Mix proportion influence, Shrinkage, Plastic Shrinkage, Drying Shrinkage, Moisture movement, Autogenous Shrinkage, Carbonation shrinkage, Concrete Durability, Strength to Durability relationship, Concrete volume change, Durability definition, durability significance, Permeability, Cement paste permeability, Concrete permeability, Plastic shrinkage cracks, Settlement cracks, Thermal shrinkage, Hardened concrete testing, Concrete mix design, Special concrete, concrete methods

FUNDAMENTALS OF RESERVOIR ENGINEERING

Author: LP Dake

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET304, PET403, PET502

Topics: reservoir engineering, MATERIAL BALANCE APPLIED TO OIL RESERVOIRS, PVT ANALYSIS FOR OIL, DARCY'S LAW AND APPLICATIONS, WELL INFLOW EQUATIONS FOR STABILIZED FLOW CONDITIONS, BASIC DIFFERENTIAL EQUATION FOR RADIAL FLOW IN A POROUS MEDIUM, REAL GAS FLOW, GAS WELL TESTING, NATURAL WATER INFLUX, MMISCIBLE DISPLACEMENT

Fluid mechanics and hydraulics

Author: Mahesh kumar

School: Chukwuemeka Odumegwu Ojukwu University

Department: Engineering

Course Code: ENG232

Topics: fluid pressure, hydrostatic forces, submerged surfaces, buoyancy, floatation, fluid kinematics, fluid dynamics, vortex flow, potential flow, ideal fluid flow, laminar flow, viscous flow, boundary layer theory, compressible flow, model similitude, free jets, fluid machines, pelton turbine, impulse turbine, francis turbine, radial flow reaction turbines, propeller, kaplan turbine, axial flow reaction turbines, hydraulic turbines, centrifugal pumps, reciprocation pumps, hydraulic systems, fluid continuum, fluid properties, specific weight, weight density, viscosity, perfect gas law, isobaric process, adiabatic process, surface tension, capillarity, capillary effect, vapour pressure, cavitation, pascal's law, hydrostatic law, Bouyant force, centre of buoyancy, archimedes principle, metacentre, metacentric height, cauchy-reimann equations, Euler's equation, Bernoulli's equation, continuity equation, orfices, hydraulic coefficients, uniform flow, source flow, sink flow, free vortex flow, notches, weirs, francis formula, bazin formula, rehbock formula, cipolletti weir, reynolds experiment, Navier-stoke equation, efflux viscometer, ogee weir, boundary layers, stagnation pressure, stagnation density, stagnation temperature, specific energy curve, critical depth, critical velocity, sub-critical flow, hydraulic jump, francis turbine, velocity triangle, draft tube, rotodynamic turbine

A Textbook of Fluid Mechanics and hydraulic machines, 9th edition

Author: RK bansal

School: Covenant University

Department: Engineering

Course Code: CVE332

Topics: Fluid Mechanics, hydraulic machines, viscosity, compressibility, bulk modulus, surface tension, capillarity, vapor pressure, cavitation, Pascal's law, manometers, Piezometer, differential manometer, isothermal process, buoyancy, flotation, meta-center, fluid flow, continuity equation, velocity, acceleration, velocity potential function, stream function, equipotential line, Vortex flow, ideal flow, potential flow, momentum equation, free liquid jets, orifices, mouthpieces, notches, weirs, viscous flow, turbulent flow, Reynolds experiment, dimensional homogeneity, model analysis, dimensionless numbers, Boundary layer flow, compressible flow, Mach number, Jet propulsion, hydraulic machines, turbines, Pelton wheel, Radial flow reaction turbines, Francis turbine, axial flow reaction turbine, Draft tube, specific speed, unit quantities, centrifugal pumps, cavitation, maximum suction lift, net positive suction head, reciprocating pumps, air vessels, fluid system, hydraulic press, hydraulic accumulator, hydraulic intensifier, hydraulic ram, hydraulic lift, hydraulic crane, hydraulic coupling, hydraulic torque converter, air lift pump, gear-wheel pump

Well testing

Author: John lee

School: Abubakar Tafawa Balewa University, Bauchi

Department: Engineering

Course Code: PEE513

Topics: well testing, fluid flow, Pressure Buildup Tests, Flow Tests, Gas Well Testing, Dimensionless Variables, Van Everdingen Solutions, Hurst Solutions, Diffusivity Equations

Production and Transport of Oil and Gas Gathering and Transportation, Second Edition

Author: AP Szilas

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET511

Topics: Separation of oil and gas, Valves, pressure regulators, Line pipes, Separator selection, On-lease oil storage, Fluid tolume measurement, Pipeline transportation of oil, Pressure waves, waterhammer, Slug transportation, Isothermal oil transport, isothermal oil transport system, Non-isothermal oil transport, Transient flow in pipeline systems, Steady-state flow in pipeline systems

Thermodynamic and Transport Properties of Fluids ,5th edition

Author: GFC Rogers, YR Mayhew

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG209

Topics: Thermodynamic, Transport Properties of Fluids, steam table, saturated water, saturated steam, superheated steam, supercritical steam, compressed water, saturated ice, saturated steam

Building Materials, Revised Third Edition

Author: SK Duggal

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3302

Topics: Building Materials Principal Properties, Structural Clay Products, Brick's Classification, Brick's Testing, Clay Tiles, Terracotta, Porcelain, stoneware, Earthenware, Glazing, Rocks, Stones, Rock-forming minerals, Rock's Classification, Stone Durability, Stones Application, Stone seasoning, wood, wood Products, Trees Classification, Trees growth, Timber Preservation, Timber testing, Timber Structure, Timber's Fire Resistance, Properties of wood, wood products, wood-products applications, Material for making concrete, Cements, Portland cement, Raw materials chemical composition, Cement Hydration, Rate of Hydration, Hydration water requirement, Cements manufacturing, Cements testing, Cement Types, Cements storage, Aggregates, Aggregates classification, Aggregates characteristics, Deleterious Materials, Organic Impurities, Soundness, Aggregates Thermal Properties, Fine Aggregates, Coarse Aggregates, Cinder Aggregates, Mixing water Quality, Effect of mixing water from different source, Water for washing aggregates, Curing water, Lime, Limestone's Impurities, Limestone's Storage, Lime Vs Cement, Pozzolanas, Concrete, water-cement ratio, workability, Maturity, Defects, Re-vibration, Rheology, Non-destructive testing, Admixture for concrete, Concrete Mix design, Building Mortars, Ferrous Metals, Non-Ferrous Metals, Ceramic Materials, Polymeric Materials, Paints, Enamels, Varnishes, Tar, Bitumen, Asphalt, Gypsum, Special Cements, Cement Concretes, Adhesives, Water proofing materials, Fiber, Geosynthetics, Composite Materials, Smart materials, Asbestos, Thermoc0ol, Heat Insulating Materials, Sound Insulating Materials.

Engineering Thermodynamics Work and Heat Transfer ,Fourth edition

Author: Gordon Rogers, Yon Mayhew

School: Rivers State University of Science and Technology

Department: Engineering

Course Code: FEC251

Topics: Engineering Thermodynamics, Work, Heat Transfer, Thermodynamic properties, temperature, Law of Thermodynamics, Non-Flow Processes, Constant volume process, Constant pressure process, Polytropic process, Adiabatic process, Isothermal process, Flow Processes, Nonsteady-flow processes, Boiler, condenser, Throttling, Reciprocating compressor, Cycle efficiency, Reversibility, irreversibility, Exergy, Gibbs function, steady-flow system, Properties of Fluids, Vapour Power Cycles, carnot cycle, rankine cyclel, reheat cycle, regenerative cycle, economiser, air preheater, steam cycles, Gas Power Cycle, gas turbine cycle, Closed-cycle gas turbine, Intercooling, reheating, Combined gas, steam cycles, Reciprocating engine cycles, Heat Pump, Refrigeration Cycles, Reversed Carnot cycle, Practical refrigeration cycles, Water refrigerator, Absorption refrigerators, Gas cycles, Hygrometry, psychrometry

Fundamentals of Thermodynamics lecture note

Author: Utazi Divine

School: Air Force Institute of Technology

Department: Engineering

Course Code: GET206

Topics: perfect gas, boyle's law, charle's law, gay-lussac's law, general gas equation, joules law, specific heat, isobaric process, isochoric process, isothermal process, enthalpy, first law of thermodynamics, perpetual motion machine of the first kind, flow process, non-flow process, water turbine, steam turbine, centrifugal pump, pure substance, compressor, evaporator, phase changes, saturated vapour, super heated vapour, steam tables

A Geology for Engineers, 7th Edition

Author: FGH Blyth, MH de Freitas

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3401

Topics: Geology, Earth's Surface, Earth's Dimensions, Surface Relief, Earth's Interior, Temperature gradient, Earth's Density, Earthquakes, Isostasy, Continental Drift, Oceanic Ridges, Rock Magnetism, Drift Mechanism, Geological History, Strati-graphical column, Plate Tectonics, Earth age, Earth origin, Precambrian, Phanerozoic, Surface Processes, Weathering, Erosion, Deposition, Minerals, Igneous Rocks, Sedimentary Rocks, Metamorphic Rocks, Geological Structures, Strength of Geological materials, In-situ investigations, Laboratory investigations, Geological Maps, Ground-water, Slope Stability, Reservoirs, Dams, Excavations, Ground water treatment, Nuclear waste, Foundations, Construction materials, Water supplies, Retaining walls, Thermal treatment, Consolidation, Grouting, Dewatering, Underground excavations, Disposal of excavated materials, Surface excavations, Ground-water control, Underground reservoir, Reservoirs, Dams, Slope Stability, Slope Failure, Water levels, Aquifers, Aquicludes, Hydrological Cycle

Strength of Material, Second Edition

Author: SS Rattan

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3308

Topics: Simple stress, simple strain, Shear stress, Saint-Venant's principle, Stress, strain, Modulus of elasticity, Modulus of Rigidity, Bar elongation, Superposition principle, Tapering section Bars, Elongation due to self-weight, Uniform strength column, Statically indeterminate systems, Temperature stresses, Shrinking on, Strain analysis, Tensile test diagram, Elastic constants, Three-Dimensional stress systems, Compound stress, compound stress, Principal stresses, Maximum shear stresses, Mohr's Stress cycle, Three coplanar stress, Ellipse of Stress, Strain Analysis, Principal Strain, Principal shear strain, Mohr's Strain cycle, Strain Energy, Shear force, Bending moment, Supports types, Bending stress in beams, Simple bending theory, Moment of inertia, Flitched beams, composite beams, Unsymmetrical bending, Ellipse of inertia, Shear stress in beams, Shear stress variation, Built-up beams, Shear centre, Deflection, Beam differential equation, Deflection at a point, Macaulay's method, Moment-Area method, Strain energy due to bending, Castigliano's First theorem, Deflection by castigliano's Theorem, Impact loading on beams, conjugate beam method, Betti's reciprocal deflections theorem, Maxwell's Reciprocal Deflection theorem, Fixed beams, Continuous beams, Fixidity Effects, Clapeyron's three moment equation, Torsion, Springs, Columns, Struts, Failure Theories, Plastic bending, Plane frame structures, Materials properties, Materials testing, Tensile testing, Compression testing, Torsion testing, Hardness testing, Impact testing, Fatigue testing

Introduction to Well Testing

Author: schlumberger

School: University of Port Harcourt

Department: Engineering

Course Code: PNG501

Topics: Geology, Reservoir Drive Mechanisms, Practical Well Testing, Drill Stem Testing Tools, WTI Essentials, MDH Plot (Dd #1), Superposition Plot, Well Models, Reservoir Models, Boundary Model, Gas Well Testing.

Engineering economics material

Author: ENG FUTO

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ENG212

Topics: Engineering economy, engineering process, debt capital, equity, interest, interest formula, time value of money, cash flows over time, single payment compound amount factor, single-payment present-worth factor, equal-payment-series compound-amount factor, present-worth factor, functional notation, interest-formula relations, arithmetic gradient series factor, uniform-gradient-series factor, nominal interest rates, effective interest rates, capital-recovery factor

Craig's Soil Mechanics, 7th edition

Author: RF Craig

School: Bayero University, Kano

Department: Engineering

Course Code: CIV3304

Topics: Soil mechanics, Soils basic characteristics, Soils nature, Particle size analysis, fine soils plasticity, Soil description, Phase relationships, Soil compaction, Seepage, Soil water, Permeability, Seepage theory, Flow nets, Anisotropic soil conditions, Non-homogenous soil conditions, Transfer condition, Grouting, Frost heave, Effective stress, effective stress principle, Partially saturated soils, Shear strength, Shear failure, Shear strength tests, Sands shear strength, Saturated clays Shear strength, Pore pressure coefficients, Stresses, displacements, Elasticity, Plasticity, Stresses from elastic theory, Displacement from elastic theory, Lateral earth pressure, Rankine's theory of earth pressure, Coulomb's theory of earth pressure, Gravity walls, Embedded walls, Braced excavations, Diaphragm walls, Reinforced soil, Slopes stability, Plane translational slip analysis, long-term stability, Embankment dams, Ground investigation, Borehole logs, Geophysical methods, Ground contamination

Numerical methods for engineers ,8th edition

Author: Steven Chapra, Raymond Canale

School: University of Uyo

Department: Engineering

Course Code: GRE411

Topics: Mathematical Modeling, Engineering Problem Solving, Programming, Software, structured programming, Modular Programming, EXCEL, MATLAB, Mathcad, Significant Figures, accuracy, precision, error, Round-Off Errors, Truncation Errors, Taylor Series, Bracketing Methods graphical method, bisection method, False-Position Method, Simple Fixed-Point Iteration, Newton-Raphson Method, secant method, Brent’s Method, multiple roots, Roots of Polynomials, Müller’s Method, Bairstow’s Method, Roots of Equations pipe friction, Gauss Elimination, Naive Gauss Elimination, complex systems, Gauss-Jordan, LU Decomposition, Matrix Inversion, Special Matrices, Gauss-Seidel, Linear Algebraic Equations, Steady-State Analysis, One-Dimensional Unconstrained Optimization, Parabolic Interpolation, Golden-Section Search, Multidimensional Unconstrained Optimization, Constrained Optimization, linear programming, Nonlinear Constrained Optimization, Least-Squares Regression, linear regression, polynomial regression, Multiple Linear Regression, Nonlinear Regression, Linear Least Squares, interpolation, Newton’s Divided-Difference Interpolating Polynomials, Lagrange Interpolating Polynomials, Inverse Interpolation, Spline Interpolation, Multidimensional Interpolation, Fourier Approximation, Curve Fitting, Sinusoidal Functions, Continuous Fourier Series, Fourier Integral, Fourier Transform, Discrete Fourier Transform, Fast Fourier Transform, power spectrum, Newton-Cotes Integration Formulas, Trapezoidal Rule, Simpson’s Rules, multiple integrals, Newton-Cotes Algorithms, Romberg Integration, Adaptive Quadrature, Gauss Quadrature, Improper Integrals, Monte Carlo Integration, Numerical Differentiation, High-Accuracy Differentiation Formulas, Richardson Extrapolation, partial derivatives, Numerical Integration, Runge-Kutta Method, Euler’s Method, Boundary-Value Problems, Eigenvalue Problems, Finite Difference, Elliptic Equations, Laplace equation, Boundary Condition, Heat-Conduction Equation, Crank-Nicolson Method, Finite-Element Method

Past Questions related to Applied Petroleum Reservoir Engineering, Third edition

Work study and productivity 2018 & 2019

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: IPE403

Topics: Work study, work productivity, reliability, maintainability, inputs availability, efficiency, effectiveness, service delivery, labour productivity, waste reduction, equipment productivity, work study, work measurements, ergonomic, value analysis, excess work content, fatigue, job elements, partial productivity, total productivity, productivity auditor

Petroleum production engineering 1

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET306

Topics: Petroleum production engineering, critical point, cricondentherm, cricodenbar, retrograde condensation, dry gas reservoir, wet gas reservoir, bubble point curve, dew point curve, Gas condensate, Standing-Katz solutions, constant composition expansion test, differential liberation experiment, isothermal compressibility, Bubble point pressure, gas solubility, crude oil viscosity, crude oil density, bottomhole completion, Darcy's law, oil production

Polymer rheology 1

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PTE411

Topics: Polymer rheology, Newtonian fluid, pseudolastric liquids, dilatant fluid, Bingham fluid, casson fluid, rheopectic fluid, thixotropic fluid, stress relaxation, creep deformation, polymer rheology, time-independent fluids, pseudoplastic fluid, Casson fluid, Ostwald-de Waele equation, Maxwell model, Maxwell element, cone-and-plate viscometer, creep formation, rheometers, rheological equation, fluid viscosity, volumetric flow rate

Petroleum engineering

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET317

Topics: Petroleum engineering, efficiency porosity, total porosity, akata formation, agbada formation, Paleocene age, Eocene age, Miocene age, source rock, seal rock, reservoir rock, overburden rock, sedimentary rock, petroleum trap, structural trap, combination trap, stratigraphy trap, seismic waves, water porosity, gas porosity, oil porosity

Reservoir engineering 3

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET502

Topics: Reservoir engineering, pressure analysis, single well tests, multiple well test, reservoir limit test, secondary oil recovery, water influx, gas coning, water coning

Petroleum rock mechanics

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET415

Topics: Petroleum rock mechanics, isotropic rock, anisotropic rock, rock dynamic properties, shear modulus, young's modulus, elastic region, yield point, chip hold down, uniaxial compressive strength, ductile region, brittle region, shear failure, hydro pressure, abnormal formation pore pressure, overburden pressure

Applied Electricity

Year: 2016

School: Federal University of Technology, Owerri

Department: Science and Technology

Course Code: PHY201

Topics: Current, waveform, peak to peak value, peak factor, j-operator, superposition theorem

Soil plants and energy balance Principles

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: ABE504

Topics: Soil plants, energy balance Principles, hydrostatic potential, capillary potential, hygroscopic potential, surface tension, soil moisture stress, wetting front, saturation capacity, field capacity, moisture equivalent, wilting coefficient, wilting range, available water, matrix potential, gravitational potential, solute potential, pressure potential, saturated condition, dry condition, transpiration, evapotranspiration

Transport phenomena 1

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: CHE307

Topics: Transport phenomena, continuity equation, general energy equation, steady flows, unsteady flows, uniform flows, non uniform flows, laminar flow, turbulent flows, buoyancy, buoyancy center, density, viscosity, temperature, pressure, specific volume, specific gravity, specific tension, pressure center

PETROLEUM PRODUCTION 1

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET306

Topics: gas, cricondenbar, cricondenthern, reservoir, liberation, bubble point, gas solubility, hydrocarbon, Darcy's law, oil, gas

Engineering properties of biological materials

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: BRE331

Topics: Fluids, ideal fluid, pseudo plastic fluid, dilatant fluid, specific gravity, viscosity, moisture content, biomaterials, terminal velocity, drag coefficient

Electrical drive system

Year: 2019

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PSE506

Topics: Electrical drive system, modern electric drive system, mechanical power developed, shaft speed, shaft torque, slip speed, line circuit, motor speed, efficiency, mechanical power, air gap power, stray power

Reservoir Engineering 2011, 2012, 2015, 2016 & 2018

Year: 2018

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: PET403

Topics: Reservoir Engineering, retrograde condensation, reservoir barrel, stock tank barrel, reservoir pore volume hydrocarbon pore volume, high shrinkage oil, low shrinkage oil, oil formation volume factor, solution gas-oil ration

Oilseed processing and utilization

Year: 2020

School: Federal University of Technology, Owerri

Department: Engineering

Course Code: FST513

Topics: Oilseed processing, Oilseed utilization, palm oil processing, oilseed processing, African locus bean processing techniques, oil palm fruit processing, palm oil clarification, palm oil purification, palm oil packaging, palm kernel oil production, palm kernel nut, palm kernel oil, palm kernel cake, palm kernel sludge, sunflower seed oil manufacture, groundnut oil characteristics, aqueous alcohol leach, dilute acid leach, moist heat water leach, oil seeds quality, oil seed processing

Tests related to Applied Petroleum Reservoir Engineering, Third edition

Physics (JAMB)

School: WAEC, JAMB & POST UTME

Department:

Course Code: JAMB

Topics: Physics, JAMB, Friction, work, force, motion, speed, velocity, energy, hydraulic press, relative density, hydrometer, gas law, sound wave, wave, light, mirror,capacitor, electricity, pressure

Mathematics (JAMB)

School: WAEC, JAMB & POST UTME

Department:

Course Code: JAMB

Topics: Mathematics, JAMB, Logarithm, standard form, permutation, combination, number system, set, ratio, indices, factorization, inequality

Novrazbb Yotjob distinctquote yourowndir muttcat scholarship carlesto newsfunt